Baoji · Shaanxi · China  ·  ISO 9001:2015  ·  800+ t in stock
Materials — by grade Products — by form Industries Tools & calculators Technical guides News & notes Case deliveries About & factory Quality & certificates Contact / RFQ Request a quote
Home/Products/Gr2 titanium plate 6.0 × 1500 × 3000 mm
LOT 26-1104Gr2 titanium plate 6.0 × 1500 × 3000 mm · PICKLED · BAY 3 · shot 2026-11-09
SURFACE
EDGE
BUNDLE
MTC 3.1

All four images are of the actual lot, shot in Bay 3 on 2026-11-09. We do not use library photography.

84 t on floorASTM B265Ships in 3 days

Gr2 titanium plate 6.0 × 1500 × 3000 mm

Pickled · 21 coils · FOB 8.87 USD/kg

Quick specificationSKU TI-PL-G2-6015 · rev 2026-11-01
Grade / UNS
Grade 2 commercially pure · R50400
Governing spec
ASTM B265 — we produce and test to this, not to GB alone
Size
6.0 × 1500 × 3000 mm · cut-to-length available
Surface / condition
Pickled, mill annealed · 21 coils on floor
Tolerance
Thickness ±0.32 mm · width +8/0 mm · flatness ≤ 10 mm/m
Density
4.51 g/cm³ typical · 0.163 lb/in³
Weight per sheet
121.7 kg
FOB Shanghai
8.87 USD/kg · valid to 2026-11-18 · excludes Chinese VAT
Minimum order
500 kg from stock · zero-cutting from 1 piece
Documentation
MTC EN 10204 3.1 per heat · NDT record · packing list · CoC
FOB Shanghai
8.87 USD/kg
valid to 2026-11-18 · excludes Chinese VAT · FX ref 6.7188
Minimum order
500 kg from stock · zero-cutting from 1 piece
Documentation
MTC EN 10204 3.1 per heat · NDT record · packing list · CoC
Request a firm quote Download spec sheet

A firm quote needs thickness, size, quantity and destination port. Nothing here requires a phone call.

Why buyers reach for Gr2 plate

Gr2 is the balance point of the commercially pure family: about 30 % stronger than Gr1 without giving up the formability that makes it usable for welded tank work, and it keeps a wide corrosion margin in the media where stainless steels pit. Roughly two thirds of the plate we ship out of Baoji is Gr2, and most of it goes into vessels, ducting, tank linings and heat-exchanger service.

Where Gr2 is the wrong answer: above roughly 300 °C continuous service it loses strength faster than people expect, and it is not a structural grade. That is Gr5 or Gr9 territory. We will say so on the quote rather than sell you plate that fails a proof test.

Chemistry of the lots on the floor

ElementSpec max
Ti + impurities≥ 99.0 %
Oxygen0.25 %
Iron0.30 %
Carbon0.08 %

Mechanical properties — ASTM B265 Gr2, 6 mm

PropertySpec min
UTS345 MPa
Yield Rp0.2275 MPa
Elongation A₅₀20 %

FAQ on this product

Firm to valid to 2026-11-18 for the lot on the floor, FOB Shanghai, excluding Chinese VAT, at the FX reference on the quote. After that date — or if the lot is committed elsewhere — we re-quote.

Yes, zero-cutting from one piece, 500 mm minimum length. Adds two days and a per-cut charge stated on the quote.

Yes — SGS, TÜV or BV at your cost. Add about six working days for scheduling the witness. We have hosted 41 witness inspections since 2022.


Lot data verified against MTC nos. 26-1104 / 26-1107 / 26-1112·Page reviewed 2026-11-01 by Wang Xiaoning, metallurgy lead

Related

相关推荐

Related product

Gr2 titanium plate 8.0 × 1500 × 3000 mm

Pickled · 9 coils · FOB 9.02 USD/kg

Open →
Related product

Gr5 / TC4 titanium alloy plate 10 × 1000 × 2000

Milled both sides · FOB 13.10 USD/kg

Open →
Related product

Gr7 titanium plate with palladium 3–20 mm

Reducing-acid service · 3 t minimum

Open →