Baoji · Shaanxi · China  ·  ISO 9001:2015  ·  800+ t in stock
Materials — by grade Products — by form Industries Tools & calculators Technical guides News & notes Case deliveries About & factory Quality & certificates Contact / RFQ Request a quote
Home/Company
Company

We are a stockist and a machine shop, not a trading desk

Titanova Metals holds and processes titanium and nickel mill products in Baoji, Shaanxi — the cluster that produces most of China's titanium. This page exists so you can check the claims before you send a drawing, not after.

Company factsverified 2026-11-01 · available on request
Registered entity
Titanova Metals Co., Ltd · unified social credit code on request
Founded / export licence
2014 · independent import & export rights since 2016
Site
Floor 4, Building 4, No. 188 Gaoxin Avenue, High-tech Zone, Baoji — office 620 m², warehouse 4,100 m², machining bay 1,850 m²
People
48 total — 11 machining, 9 inspection & QC, 7 warehouse, 12 sales/PM, 5 engineering, 4 admin
Inventory carried
800+ t titanium & nickel; 1,500+ flanges/fittings; 30,000+ fasteners; 3,000+ machined detail parts
Turnover band
USD 9–12 m per year, ~78 % exported (we do not publish an exact figure)
Markets shipped to
31 countries since 2014 — EU 34 %, CIS 21 %, South & Southeast Asia 18 %, Middle East 12 %, other 15 %
Ports used
Qingdao (primary), Tianjin, Shanghai; air ex-XIY for samples under 200 kg
Payment terms
30 % T/T advance, balance before shipment; irrevocable L/C at sight on orders above USD 30,000
What is actually in the building

Equipment list

Make and model, because “advanced equipment” tells a purchasing engineer nothing.

Production

MachineCapacityQty
Rolling mill, 4-highto 2,000 mm width1
Hydrostatic tube extruderØ12–219 mm2
Multi-pass cold pilgerØ6–76 mm3
Vacuum annealing furnace2.5 t charge2
CNC turning centresØ up to 630 mm6
4-axis machining centres800 × 500 × 6004
Wire EDM400 × 300 × 2501
GTAW / GMAW welding bayspurged backing5
Pickling lineHF/HNO₃, closed loop1

Inspection & test

InstrumentScopeCalibration
Optical emission spectrometerfull chemistry, per heatannual, NIST-traceable
Universal tensile machine 100 kNUTS, Rp0.2, elongationannual
Ultrasonic testing benchbar & tube, to 150 mmannual
Eddy-current testerseamless tubeannual
Hydrostatic test rigto 40 MPa, per bundleannual
Hardness tester (Brinell / Rockwell)per lotsemi-annual
Coordinate measuring machine±0.005 mm, machined partsannual
Salt-spray chamberqualification onlyannual
Third-party inspection welcome — SGS, TÜV or BV at your cost. We have hosted 41 witness inspections since 2022 and will send you their report even when the finding is against us.
Certificates — with numbers you can look up

What we hold

证书卡片

Active

ISO 9001:2015

Cert. 049-2024-Q-1187 · valid to 2027-08
Scope: rolling, drawing, machining of Ti & Ni mill products

Active

Pressure equipment material supplier

NB/T 47010 conformity for flange forgings · reviewed annually

On request

Export licence & customs registration

Independent I/E rights since 2016 · HS 8108.90 filings

Not held

AS9100 · ISO 13485

We do not hold these. For aerospace or implant end-use, buy through a certified route — we will say so rather than oversell.

证书影像

ISO 9001
2015
SCOPE: Ti & NiCERT 049-2024-Q-1187
ISO 9001:2015 — cert. 049-2024-Q-1187, valid to 2027-08
MTC EN 10204 3.1 · client redacted
Redacted MTC — chemistry, mechanicals, heat no., NDT record
WITNESS OKSGS / TÜV witness bay · 41 hosted since 2022
Third-party inspection — SGS / TÜV / BV at buyer cost
Who writes this site

Named authors, not “our professional team”

Every technical page carries one of these people. If a number on a datasheet is wrong, there is a name attached to it.

作者卡片

WX

Wang Xiaoning

Metallurgy lead · 14 years

Owns grade datasheets, chemistry and mechanical ranges, and the selection-trap sections. Signs the MTCs.

ASTM B265/B348Gr5 vs Gr23Failure review
LQ

Li Qiang

Machining & welding supervisor · 11 years

Writes the machining, weld-filler and tolerance pages. Runs the four machining centres and the purged welding bays.

±0.02 mm workERTi-15Straightening
ZY

Zhou Yu

Export & logistics lead · 9 years

Owns packing, freight, documentation and the price index methodology. Handles the 41 hosted witness inspections.

Sea / airIncotermsCoC / MTC sets
The part most supplier pages leave out

What we are not good for

限制条目

No aerospace primary structural

We do not hold AS9100 and we will not sign a NADCAP flow-down. Flight-critical structural titanium needs a certified mill route.

No implant-grade finished devices

We supply Gr23 / F136 bar and wire with per-heat traceability. We do not machine finished implants or hold ISO 13485.

No Gr12, no Gr29, no sponge, no scrap

If your drawing calls for them, we will tell you that rather than quote a lead time we cannot control.

Not below 500 kg plate / 50 kg machined

Setup cost makes the unit price unreasonable, and we would rather lose the order than send you a number you cannot defend internally.

How we got here

Started in 2014 as a machining shop taking offcuts from larger Baoji mills. The stock-holding side grew because buyers kept asking the same question — can you ship this week — and the mills would not answer it. We began carrying our own Gr2 plate and Gr5 bar in 2018 to be able to. Nickel came in 2021 when acid-recovery projects started specifying Ni200 plate and nobody local would hold it.

The technical pages started in 2024 because of a different problem: buyers were receiving Gr5 flanges ordered as “Grade 5 to B16.5” with an F2 CP facing, and nobody could point at a document that explained why. That is the standard we hold ourselves to now — if we cannot name the specification and the condition, we do not publish the number.


Want the document set before you enquire?

Certificate scans, a redacted MTC, the equipment list and the packing spec — one email, no newsletter, no drip campaign.

Request the packOr just ask a question